WeldCyprus
ALL CYPRUS // WITH OR WITHOUT A BACK

A steel bench
to go with the table,
or to stand alone by the pool.

One to three metres long, backrest if you want one, seat in timber or checker plate. It goes in the yard, by the pool, in a stairwell or beside the gate.

1–3 METRES WITH BACKREST TIMBER OR PLATE HOT-DIP GALVANISED ANCHORED DOWN
Welder in a mask making a TIG weld on a steel box section, close-up
from €300
PER BENCH
5
WORKING DAYS
up to 3 m
LENGTH
45 cm
SEAT HEIGHT

Worth deciding before you order

/ 01

A backrest changes more than the look

A bench without a back is shorter, cheaper and slides under the table. With a back, people actually sit on it for an evening. A dining set usually takes one with a back against the wall and one without on the walkway side.

/ 02

Seat: timber or metal

Timber does not burn the backs of your legs in summer, but wants oiling once a season. Checker plate asks for nothing at all and in July gets hot enough that nobody sits on it. By the pool, timber almost always wins.

/ 03

Anchor it down or not

A loose bench is easy to move, but a strong wind drags it and scratches the tiles. Anchoring solves both; where the tiles must not be drilled, I make weighted feet instead.

Build it to your size

Set the length, pick the seat, and the price follows. The configuration stays in the page address — save the link or send it to me.

Typical configurations and prices

Why the price here is approximate

What the page works out is an estimate, not a quote. The final figure is always worked out separately, because the same structure in two different places does not cost the same.

  • How easy the spot is to reach, and whether the van and the gear fit.
  • What it stands on and bolts to: wall, concrete, roof, soil — the condition of the base changes the job.
  • Where reinforcement is needed and where it can be done more simply — and come out cheaper.
  • How fast you need it, and how much preparing the site takes.

This is not factory production, where everything comes out identical, soulless and at the lowest price. Each piece is made for your particular spot. Write to me — we will go through where reinforcement is worth it and where it is not, and I will find an option that suits you.

SEND THIS CONFIGURATION TO WHATSAPP

More from the catalogue

/ 01 7 working days

Table

A steel frame built for the top you choose: oak, HPL compact, concrete or glass. Galvanised when it lives outdoors.

Oak 40 mm HPL compact 12 mm Concrete over steel Hot-dip galvanised
from €350 CONFIGURE
/ 02 7 working days

BBQ grill

A fixed BBQ in 3–6 mm steel: open, with a lid, or with a chimney. Thick steel does not warp in the heat.

6 mm With chimney Side table Wheels
from €400 CONFIGURE
/ 03 5 working days

Outdoor shower

A shower post by the pool or at the beach house. Galvanised, aluminium or stainless — next to salt water that is not decoration.

Stainless AISI 304 Timber deck Hot-water mixer
from €500 CONFIGURE
/ 04 2 working days

A/C bracket

Bracket for the outdoor unit: up to 12,000, 18,000 BTU or more. With an anti-theft cage if the unit sits on the ground floor.

Hot-dip galvanised Stainless AISI 304 Anti-theft cage
from €150 CONFIGURE
/ 05 4 working days

Solar heater frame

Frame for a 120–200 litre tank, flat roof or pitched. With wind bracing so the winter gusts leave the collector alone.

200 litres Pitched roof Wind bracing
from €350 CONFIGURE
/ 06 4 working days

Roof ladder

Ladder to the roof for the boiler and the aerials: straight, with a safety cage, or with a removable lower section.

With safety cage Hot-dip galvanised Top platform
from €300 CONFIGURE

Frequently asked

What does a steel bench cost?
A 1.6 m bench with a backrest and a timber seat is around €500. Without the backrest, around €450. Three metres in oak, around €1300. A small one-metre bench without a back starts at €300.
Can I order benches together with the table?
Yes, and that is how most people order: a table plus two benches of the same length. Build the table in the calculator, send it, and add "plus two benches" in the message — I will price it as a set.
What happens to the timber near the sea?
Salt barely troubles timber; it goes after the steel. So near the sea I change the frame, not the seat: hot-dip galvanising instead of paint, and stainless on the front line. The timber stays ordinary, it just wants oiling more often.

Order — Bench

How to reach me

Call +357 99 230 862

Fastest way: send a photo of the job to WhatsApp or Telegram — you get a price within the hour.

PHONE / WHATSAPP
+357 99 230 862
TELEGRAM
@welder_cyprus
BASE
Larnaca, Cyprus
Installation across Cyprus
HOURS
Mon–Sat 08:00–20:00