WeldCyprus
ALL CYPRUS // GALVANISED · STAINLESS

An A/C bracket
that outlives
the air conditioner.

A pair of braced cantilevers for an outdoor unit of any size. Galvanised for an ordinary facade, stainless when the house stands by the sea. With a cage when the unit hangs at arm height.

UP TO 24,000 BTU HOT-DIP GALVANISED STAINLESS ANTI-THEFT CAGE 2 DAYS
Welder in a mask making a TIG weld on a steel box section, close-up
from €150
PER UNIT
2
WORKING DAYS
up to 6
UNITS PER VISIT
4
ANCHORS PER ARM

Worth deciding before you order

/ 01

A pressed bracket was not sized for your unit

Off-the-shelf angles from the builders merchant are made for an average weight on an average wall. For a 24,000 BTU unit, or a hollow block facade, they are not enough: the bracket does not break, the wall does. A welded one is sized for that weight and that masonry.

/ 02

Rust starts at the fixings

Even a galvanised bracket bleeds rust if it hangs on black bolts. All fixings go in stainless, and the welds get a zinc-rich coat afterwards — otherwise the streaks appear down the facade within a year.

/ 03

A cage matters on the ground floor

Outdoor units at street level get stolen, and in Cyprus that is not rare. A barred cage with a lock costs less than a new unit, and it also keeps footballs off the coil.

Build it to your size

Set how many units and how big — the price follows. A second and third unit on the same visit come out cheaper: the travel is paid for once.

Typical configurations and prices

Why the price here is approximate

What the page works out is an estimate, not a quote. The final figure is always worked out separately, because the same structure in two different places does not cost the same.

  • How easy the spot is to reach, and whether the van and the gear fit.
  • What it stands on and bolts to: wall, concrete, roof, soil — the condition of the base changes the job.
  • Where reinforcement is needed and where it can be done more simply — and come out cheaper.
  • How fast you need it, and how much preparing the site takes.

This is not factory production, where everything comes out identical, soulless and at the lowest price. Each piece is made for your particular spot. Write to me — we will go through where reinforcement is worth it and where it is not, and I will find an option that suits you.

SEND THIS CONFIGURATION TO WHATSAPP

More from the catalogue

/ 01 7 working days

Table

A steel frame built for the top you choose: oak, HPL compact, concrete or glass. Galvanised when it lives outdoors.

Oak 40 mm HPL compact 12 mm Concrete over steel Hot-dip galvanised
from €350 CONFIGURE
/ 02 5 working days

Bench

Bench with or without a backrest, timber or checker-plate seat. Pairs with the table or stands alone by the pool.

With backrest Oak Hot-dip galvanised
from €300 CONFIGURE
/ 03 7 working days

BBQ grill

A fixed BBQ in 3–6 mm steel: open, with a lid, or with a chimney. Thick steel does not warp in the heat.

6 mm With chimney Side table Wheels
from €400 CONFIGURE
/ 04 5 working days

Outdoor shower

A shower post by the pool or at the beach house. Galvanised, aluminium or stainless — next to salt water that is not decoration.

Stainless AISI 304 Timber deck Hot-water mixer
from €500 CONFIGURE
/ 05 4 working days

Solar heater frame

Frame for a 120–200 litre tank, flat roof or pitched. With wind bracing so the winter gusts leave the collector alone.

200 litres Pitched roof Wind bracing
from €350 CONFIGURE
/ 06 4 working days

Roof ladder

Ladder to the roof for the boiler and the aerials: straight, with a safety cage, or with a removable lower section.

With safety cage Hot-dip galvanised Top platform
from €300 CONFIGURE

Frequently asked

What does an A/C bracket cost?
One set for a unit up to 12,000 BTU, fitted, is €150. Up to 18,000, around €200; 24,000 and above, around €250. Stainless is roughly half again. A second and third unit on the same visit cost less.
Will you take the old bracket off?
Yes — tick it in the calculator. The old one usually comes off with a grinder, and the holes are moved to fresh points: you cannot reuse a blown-out anchor hole, nothing holds in it any more.
Do you hang the air conditioner itself?
I fit the bracket, and the unit goes up with your installer — the refrigerant line and the vacuum are his work. If the unit is already hanging, I take it down, fit the bracket and put it back.

Order — A/C bracket

How to reach me

Call +357 99 230 862

Fastest way: send a photo of the job to WhatsApp or Telegram — you get a price within the hour.

PHONE / WHATSAPP
+357 99 230 862
TELEGRAM
@welder_cyprus
BASE
Larnaca, Cyprus
Installation across Cyprus
HOURS
Mon–Sat 08:00–20:00