WeldCyprus
GUIDE // SUN AND SALT

Outdoor metal furniture
for a Cypriot yard:
what survives sun and salt.

A shop-bought outdoor set in Cyprus lasts two or three seasons: thin tube rusts from the inside, timber cracks, plastic fades. Here is what to do about it and what it costs.

Published 2026-08-25
Dressed weld seam on a steel corner, close-up

Why a shop set does not reach its third summer

It is usually not the design, it is the wall thickness and what is inside the tube. Factory outdoor furniture is built from 1 to 1.2 mm tube with end caps that let water in sooner or later. The water stays inside and the frame rusts from where neither paint nor a glance can reach.

The second thing is size. A standard table almost never matches an alcove, a terrace corner or the gap between columns, so it ends up half used.

The top: four honest options

Oak is beautiful and good to touch, and it wants oil twice a year — without it, cracks appear within two seasons. HPL compact at 12 mm does not fade, does not mind rain and cleans with anything: the best choice for an open terrace. Concrete over steel looks heavy and handsome, but it prefers shade and hates being moved. Glass means laminated glass only, on a rigid frame only.

The frame: what changes near the water

Powder coating is fine under a canopy or in an inner courtyard. An open spot wants hot-dip galvanising, and the front line wants stainless. On a table the difference between paint and galvanising is about twenty per cent, and it pays for itself in the first windy winter.

Benches instead of chairs

Two benches at a table take less room than six chairs, do not blow over, and need no upkeep at all if the seat is checker plate. But a metal seat in summer gets hot enough that nobody sits on it — by the pool and in full sun, timber still wins.

The BBQ: thickness decides everything

Thin plate warps by the third fire and the lid stops closing. Four millimetres is the working thickness; six holds its shape for years and heats evenly. A chimney is needed if the grill stands against a wall or under a canopy: otherwise the smoke goes where people sit.

From this guide

Catalogue prices are what the model works out, not a price tag: nothing is in stock, every piece is welded to size. The final price is agreed personally.

/ 01 7 working days

Table

A steel frame built for the top you choose: oak, HPL compact, concrete or glass. Galvanised when it lives outdoors.

Oak 40 mm HPL compact 12 mm Concrete over steel Hot-dip galvanised
from €350 CONFIGURE
/ 02 5 working days

Bench

Bench with or without a backrest, timber or checker-plate seat. Pairs with the table or stands alone by the pool.

With backrest Oak Hot-dip galvanised
from €300 CONFIGURE
/ 03 7 working days

BBQ grill

A fixed BBQ in 3–6 mm steel: open, with a lid, or with a chimney. Thick steel does not warp in the heat.

6 mm With chimney Side table Wheels
from €400 CONFIGURE

Questions about this guide

What does a table plus two benches cost?
A 1.8 × 0.9 m table with a timber top is around €750, and a 1.6 m bench with a backrest around €500. A table and two benches comes to roughly €1750. The exact figure is agreed once I have the sizes and the spot.
What about old furniture that is already rusting?
If the tube is thin and the rust is coming from inside, repairing costs more than welding new. If the frame is heavy and only the finish has failed, I strip the rust, weld up the cracks and repaint on site — that is a call-out of a few hours.

Ask about your own job

How to reach me

Call +357 99 230 862

Fastest way: send a photo of the job to WhatsApp or Telegram — you get a price within the hour.

PHONE / WHATSAPP
+357 99 230 862
TELEGRAM
@welder_cyprus
BASE
Larnaca, Cyprus
Installation across Cyprus
HOURS
Mon–Sat 08:00–20:00