A fence is asked about per metre and paid for per job, and the two do not match unless you know what is inside the metre. Here is the price by height and by infill, with posts and installation in it — the same figures the configurator on the fences page runs.
A fence in profiled sheet on a box-section frame costs about €95 per running metre at 1 m high, €130 at 1.5 m, €150 at 1.8 m and €160 at 2 m. That includes the posts every 2.5 m and installation.
As a whole job: 20 metres at the usual 1.8 m height comes to €2950. Ten metres is €1500, forty metres €5850 — the price per metre barely changes with length, because the posts are counted for every span.
On the same 20 m run at 1.8 m: profiled sheet €2950, 3D welded panel €3300, vertical slats €3700, forged elements €5000, louvres €5500. Per metre that is €150, €165, €185, €250 and €275.
Sheet and 3D panel are the working options for a plot boundary. Slats and louvres are chosen for the look and for privacy with air passing through — a solid sheet fence on an open plot takes the full wind load, and its posts have to be set for that.
A taller fence is more infill and a stronger frame at once. Going from 1.5 m to 2 m on a 20 m sheet fence takes the price from €2550 to €3200. If the fence stands on an existing wall, the wall is part of the height — a 1 m fence on a 1 m wall gives the same privacy as a 2 m fence from the ground for less than two thirds of the price.
Hot-dip galvanising under the paint adds about 17%: the same 20 m at 1.8 m is €3450 instead of €2950. Near the sea that is not an extra but the difference between a fence for fifteen years and a fence for four.
A wicket gate in the fence line adds €395. A seafront plot adds €245 for the protection of fixings and welds.
I do not sell loose fence panels off a shelf: each section is welded to your line, your slope and your post spacing, and fitted. The price per metre above is for exactly that — a finished fence, not a panel to carry home.
Aluminium fences are quoted individually and are not in the configurator: the price depends on the profile system. For the seafront my standard answer is hot-dip galvanised steel with powder coating — it costs less than aluminium and holds the salt.
Send the length of the line, the height you want, a photo of the boundary and what the posts will stand on — soil, an existing wall, concrete. Say whether you need a wicket and how far the sea is. With that the figure does not change on site.
Sectional and privacy fences, pattern-cut panels, property and pool enclosures. From €95 per metre.
A barrier around the pool from 1.1 m high with a self-closing gate. Galvanised steel, aluminium, AISI 316 or glass. From €750.
Message me on WhatsApp and send a photo of the job straight away — I reply as soon as I am free. I do not take calls while I am working.
All welding services
We work across all Cyprus
Based in Larnaca — I travel to every town and village in Cyprus with full equipment and a generator on board.